My Brows Long Lasting Eyebrow Transfers

Directions for Use:

For a complete experience, more natural look, and extended life, try the companion product: My Brows 3-Step Care Kit. The kit comes complete with an exfoliator, transfer maintaining solution, and removal formula.

Prep

1. Clean the eyebrow with alcohol and cotton. For best results, gently exfoliate the eyebrow area
2. If placing over thinning or patchy eyebrows, trim brow hair to 1/8 and inch or less
3. Cut out and separate one pair of eyebrow designs (one left and one right). Cut as close to the design edges as possible

Application

1. Remove the clear sheet. Place eyebrow design face down. Carefully position one eyebrow design onto the eyebrow area
2. using a damp cloth or paper towel, press firmly onto the back of the design and hold for 60 seconds
3. Gently remove the paper backing and proceed to the next brow. You could use a ruler to make sure the brows are evenly positioned
4. To help blend the eyebrow design, pat the edges with facial powder that matches your skin tone

Removal

1. Saturate the eyebrow transfer with baby oil or mineral oil and let stand for 1-2 minutes, or until the eyebrow design is soft enough to remove with a cloth or tissue. You could also use the remove solution in the 3-Step Care Kit

Daily Maintenance

You can extend the life and appearance of the eyebrow design by following these suggestions

1. Apply baby powder to the eyebrow nightly, or use the post application solution in the 3-Step Care Kit
2. Avoid putting soaps, lotions, or oils directly on the eyebrow design
3. Avoid scrubbing or rubbing eyebrow design while showering or washing your face